| Beide Seiten der vorigen RevisionVorhergehende ÜberarbeitungNächste Überarbeitung | Vorhergehende Überarbeitung |
| tachtler:kali_linux_-_live_usb_encrypted_persistence_-_installation [2018/02/04 18:17] – [The following signatures where invalid] klaus | tachtler:kali_linux_-_live_usb_encrypted_persistence_-_installation [2021/11/29 17:30] (aktuell) – [Vorbereitung] klaus |
|---|
| **__Bevor__** der **USB-Stick** an die Hardware angeschlossen wird, kann mit nachfolgendem Befehl überprüft werden, welche Speichermedien bereits im System eingebunden sind: | **__Bevor__** der **USB-Stick** an die Hardware angeschlossen wird, kann mit nachfolgendem Befehl überprüft werden, welche Speichermedien bereits im System eingebunden sind: |
| <code> | <code> |
| # fdisk -ls | grep -i 'Disk /dev/sd' | # fdisk -s -l | grep -i 'Disk /dev/sd' |
| Disk /dev/sda: 40.0 GB, 40007761920 bytes | Disk /dev/sda: 40.0 GB, 40007761920 bytes |
| </code> | </code> |
| **__Nachdem__** der **USB-Stick** an die Hardware angeschlossen wurde, kann mit nachfolgendem Befehl überprüft werden, welche Speichermedien bereits im System eingebunden sind und wie der **USB-Stick** **in der Hardware eingebunden wurde**: | **__Nachdem__** der **USB-Stick** an die Hardware angeschlossen wurde, kann mit nachfolgendem Befehl überprüft werden, welche Speichermedien bereits im System eingebunden sind und wie der **USB-Stick** **in der Hardware eingebunden wurde**: |
| <code> | <code> |
| # fdisk -ls | grep -i 'Disk /dev/sd' | # fdisk -s -l | grep -i 'Disk /dev/sd' |
| Disk /dev/sda: 40.0 GB, 40007761920 bytes | Disk /dev/sda: 40.0 GB, 40007761920 bytes |
| Disk /dev/sdb: 16.4 GB, 16357785600 bytes | Disk /dev/sdb: 16.4 GB, 16357785600 bytes |
| :!: **WICHTIG** - Der Start vom USB-Stick, **__muss__** | :!: **WICHTIG** - Der Start vom USB-Stick, **__muss__** |
| * **__vor__ der Einrichtung** von **''Live USB Encrypted Persistence''**, **__noch__** | * **__vor__ der Einrichtung** von **''Live USB Encrypted Persistence''**, **__noch__** |
| * **zwingend via ''Live (868-pae)''** | * **zwingend via ''Live (686-pae)''** |
| erfolgen, wie nachfolgende Bildschirmkopie zeigt: | erfolgen, wie nachfolgende Bildschirmkopie zeigt: |
| |
| </code> | </code> |
| |
| Nach der **Beendigung** des z.B. eines ''shell''-Fensters und dem **Neustart** von einem ''shell''-Fenster, steht die neue Funktionalität zur verfügung! | Nach der **Beendigung** des z.B. eines ''shell''-Fensters und dem **Neustart** von einem ''shell''-Fenster, steht die neue Funktionalität zur Verfügung! |
| | |
| | ===== Paketinstallationen ===== |
| | |
| | Nachfolgend soll beschrieben werden, wie die Installation von **zusätzlichen, nicht im ursprünglichen ISO-Image enthaltenen Paketen** von [[https://www.kali.org/|Kali Linux]] in der Variante [[https://docs.kali.org/downloading/kali-linux-live-usb-persistence|Kali Linux Live USB (Encrypted) Persistence]] durchgeführt werden kann. |
| | |
| | Nachfolgendes **Beispiel** zeigt die Installation des **Pakets** - **''gimp''** (Grafikprogramm) exemplarisch. |
| | |
| | ==== Paket: Suche ==== |
| | |
| | Mit nachfolgendem Befehl, kann nach einem Paket gesucht werden (Die Suche kann mittels **regex**-Syntax **__optimiert__** durchgeführt werden): |
| | <code bash> |
| | # apt search ^gimp*$ |
| | Sorting... Done |
| | Full Text Search... Done |
| | gimp/kali-rolling,now 2.8.20-1.1 i386 |
| | GNU Image Manipulation Program |
| | |
| | </code> |
| | |
| | ==== Paket: Installation ==== |
| | |
| | Ein Paket kann mit nachfolgendem Befehl installiert werden, und muss durch Eingabe des Zeichens **[Y]** (Grußbuchstabe), bei einer Abfrage, bestätigt werden: |
| | <code bash> |
| | # apt-get install gimp |
| | Reading package lists... Done |
| | Building dependency tree |
| | Reading state information... Done |
| | The following additional packages will be installed: |
| | gimp-data libamd2 libbabl-0.1-0 libcamd2 libccolamd2 libcholmod3 libcolamd2 |
| | libgegl-0.3-0 libgimp2.0 libmetis5 libraw16 libsdl1.2debian |
| | libsuitesparseconfig5 libumfpack5 |
| | Suggested packages: |
| | gimp-help-en | gimp-help gimp-data-extras |
| | The following NEW packages will be installed: |
| | gimp gimp-data libamd2 libbabl-0.1-0 libcamd2 libccolamd2 libcholmod3 |
| | libcolamd2 libgegl-0.3-0 libgimp2.0 libmetis5 libraw16 libsdl1.2debian |
| | libsuitesparseconfig5 libumfpack5 |
| | 0 upgraded, 15 newly installed, 0 to remove and 1200 not upgraded. |
| | Need to get 17,6 MB of archives. |
| | After this operation, 78,7 MB of additional disk space will be used. |
| | Do you want to continue? [Y/n] Y |
| | Get:1 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libgimp2.0 i386 2.8.20-1.1 [1.758 kB] |
| | Get:2 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 gimp-data all 2.8.20-1.1 [8.789 kB] |
| | Get:3 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libbabl-0.1-0 i386 0.1.42-1 [242 kB] |
| | Get:4 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libraw16 i386 0.18.7-2 [291 kB] |
| | Get:5 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libsdl1.2debian i386 1.2.15+dfsg2-0.1 [208 kB] |
| | Get:6 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libsuitesparseconfig5 i386 1:5.1.2-2 [20,1 kB] |
| | Get:7 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libamd2 i386 1:5.1.2-2 [27,2 kB] |
| | Get:8 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libcamd2 i386 1:5.1.2-2 [27,8 kB] |
| | Get:9 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libccolamd2 i386 1:5.1.2-2 [28,9 kB] |
| | Get:10 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libcolamd2 i386 1:5.1.2-2 [25,1 kB] |
| | Get:11 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libmetis5 i386 5.1.0.dfsg-5+b2 [173 kB] |
| | Get:12 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libcholmod3 i386 1:5.1.2-2 [240 kB] |
| | Get:13 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libumfpack5 i386 1:5.1.2-2 [151 kB] |
| | Get:14 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 libgegl-0.3-0 i386 0.3.20-3 [799 kB] |
| | Get:15 http://ftp.halifax.rwth-aachen.de/kali kali-rolling/main i386 gimp i386 2.8.20-1.1 [4.824 kB] |
| | Fetched 17,6 MB in 13s (1.295 kB/s) |
| | Selecting previously unselected package libgimp2.0. |
| | (Reading database ... 319876 files and directories currently installed.) |
| | Preparing to unpack .../00-libgimp2.0_2.8.20-1.1_i386.deb ... |
| | Unpacking libgimp2.0 (2.8.20-1.1) ... |
| | Selecting previously unselected package gimp-data. |
| | Preparing to unpack .../01-gimp-data_2.8.20-1.1_all.deb ... |
| | Unpacking gimp-data (2.8.20-1.1) ... |
| | Selecting previously unselected package libbabl-0.1-0:i386. |
| | Preparing to unpack .../02-libbabl-0.1-0_0.1.42-1_i386.deb ... |
| | Unpacking libbabl-0.1-0:i386 (0.1.42-1) ... |
| | Selecting previously unselected package libraw16:i386. |
| | Preparing to unpack .../03-libraw16_0.18.7-2_i386.deb ... |
| | Unpacking libraw16:i386 (0.18.7-2) ... |
| | Selecting previously unselected package libsdl1.2debian:i386. |
| | Preparing to unpack .../04-libsdl1.2debian_1.2.15+dfsg2-0.1_i386.deb ... |
| | Unpacking libsdl1.2debian:i386 (1.2.15+dfsg2-0.1) ... |
| | Selecting previously unselected package libsuitesparseconfig5:i386. |
| | Preparing to unpack .../05-libsuitesparseconfig5_1%3a5.1.2-2_i386.deb ... |
| | Unpacking libsuitesparseconfig5:i386 (1:5.1.2-2) ... |
| | Selecting previously unselected package libamd2:i386. |
| | Preparing to unpack .../06-libamd2_1%3a5.1.2-2_i386.deb ... |
| | Unpacking libamd2:i386 (1:5.1.2-2) ... |
| | Selecting previously unselected package libcamd2:i386. |
| | Preparing to unpack .../07-libcamd2_1%3a5.1.2-2_i386.deb ... |
| | Unpacking libcamd2:i386 (1:5.1.2-2) ... |
| | Selecting previously unselected package libccolamd2:i386. |
| | Preparing to unpack .../08-libccolamd2_1%3a5.1.2-2_i386.deb ... |
| | Unpacking libccolamd2:i386 (1:5.1.2-2) ... |
| | Selecting previously unselected package libcolamd2:i386. |
| | Preparing to unpack .../09-libcolamd2_1%3a5.1.2-2_i386.deb ... |
| | Unpacking libcolamd2:i386 (1:5.1.2-2) ... |
| | Selecting previously unselected package libmetis5:i386. |
| | Preparing to unpack .../10-libmetis5_5.1.0.dfsg-5+b2_i386.deb ... |
| | Unpacking libmetis5:i386 (5.1.0.dfsg-5+b2) ... |
| | Selecting previously unselected package libcholmod3:i386. |
| | Preparing to unpack .../11-libcholmod3_1%3a5.1.2-2_i386.deb ... |
| | Unpacking libcholmod3:i386 (1:5.1.2-2) ... |
| | Selecting previously unselected package libumfpack5:i386. |
| | Preparing to unpack .../12-libumfpack5_1%3a5.1.2-2_i386.deb ... |
| | Unpacking libumfpack5:i386 (1:5.1.2-2) ... |
| | Selecting previously unselected package libgegl-0.3-0:i386. |
| | Preparing to unpack .../13-libgegl-0.3-0_0.3.20-3_i386.deb ... |
| | Unpacking libgegl-0.3-0:i386 (0.3.20-3) ... |
| | Selecting previously unselected package gimp. |
| | Preparing to unpack .../14-gimp_2.8.20-1.1_i386.deb ... |
| | Unpacking gimp (2.8.20-1.1) ... |
| | Setting up libgimp2.0 (2.8.20-1.1) ... |
| | Processing triggers for mime-support (3.60) ... |
| | Processing triggers for desktop-file-utils (0.23-2) ... |
| | Setting up libbabl-0.1-0:i386 (0.1.42-1) ... |
| | Processing triggers for menu (2.1.47+b1) ... |
| | Setting up libsdl1.2debian:i386 (1.2.15+dfsg2-0.1) ... |
| | Setting up gimp-data (2.8.20-1.1) ... |
| | Processing triggers for libc-bin (2.24-17) ... |
| | Setting up libsuitesparseconfig5:i386 (1:5.1.2-2) ... |
| | Setting up libmetis5:i386 (5.1.0.dfsg-5+b2) ... |
| | Setting up libcolamd2:i386 (1:5.1.2-2) ... |
| | Setting up libccolamd2:i386 (1:5.1.2-2) ... |
| | Processing triggers for man-db (2.7.6.1-2) ... |
| | Processing triggers for gnome-menus (3.13.3-9) ... |
| | Processing triggers for hicolor-icon-theme (0.17-1) ... |
| | Setting up libraw16:i386 (0.18.7-2) ... |
| | Setting up libcamd2:i386 (1:5.1.2-2) ... |
| | Setting up libamd2:i386 (1:5.1.2-2) ... |
| | Setting up libcholmod3:i386 (1:5.1.2-2) ... |
| | Setting up libumfpack5:i386 (1:5.1.2-2) ... |
| | Setting up libgegl-0.3-0:i386 (0.3.20-3) ... |
| | Setting up gimp (2.8.20-1.1) ... |
| | Processing triggers for libc-bin (2.24-17) ... |
| | Processing triggers for menu (2.1.47+b1) ... |
| | </code> |
| | |
| | ==== Paket: Inhalte auflisten ==== |
| | |
| | Nachfolgender Befehl zeigt den **Inhalt**, sprich die einzelnen Dateien, die mit dem Paket installiert wurden: |
| | <code bash> |
| | # dpkg --listfiles gimp |
| | /. |
| | /usr |
| | /usr/bin |
| | /usr/bin/gimp-2.8 |
| | /usr/bin/gimp-console-2.8 |
| | /usr/lib |
| | /usr/lib/gimp |
| | /usr/lib/gimp/2.0 |
| | /usr/lib/gimp/2.0/environ |
| | /usr/lib/gimp/2.0/environ/default.env |
| | /usr/lib/gimp/2.0/environ/pygimp.env |
| | /usr/lib/gimp/2.0/interpreters |
| | /usr/lib/gimp/2.0/interpreters/default.interp |
| | /usr/lib/gimp/2.0/interpreters/pygimp.interp |
| | /usr/lib/gimp/2.0/modules |
| | /usr/lib/gimp/2.0/modules/libcolor-selector-cmyk.so |
| | /usr/lib/gimp/2.0/modules/libcolor-selector-water.so |
| | /usr/lib/gimp/2.0/modules/libcolor-selector-wheel.so |
| | /usr/lib/gimp/2.0/modules/libcontroller-linux-input.so |
| | /usr/lib/gimp/2.0/modules/libcontroller-midi.so |
| | /usr/lib/gimp/2.0/modules/libdisplay-filter-color-blind.so |
| | /usr/lib/gimp/2.0/modules/libdisplay-filter-gamma.so |
| | /usr/lib/gimp/2.0/modules/libdisplay-filter-high-contrast.so |
| | /usr/lib/gimp/2.0/modules/libdisplay-filter-lcms.so |
| | /usr/lib/gimp/2.0/modules/libdisplay-filter-proof.so |
| | /usr/lib/gimp/2.0/plug-ins |
| | /usr/lib/gimp/2.0/plug-ins/alien-map |
| | /usr/lib/gimp/2.0/plug-ins/align-layers |
| | /usr/lib/gimp/2.0/plug-ins/animation-optimize |
| | /usr/lib/gimp/2.0/plug-ins/animation-play |
| | /usr/lib/gimp/2.0/plug-ins/antialias |
| | /usr/lib/gimp/2.0/plug-ins/apply-canvas |
| | /usr/lib/gimp/2.0/plug-ins/blinds |
| | /usr/lib/gimp/2.0/plug-ins/blur |
| | /usr/lib/gimp/2.0/plug-ins/blur-gauss |
| | /usr/lib/gimp/2.0/plug-ins/blur-gauss-selective |
| | /usr/lib/gimp/2.0/plug-ins/blur-motion |
| | /usr/lib/gimp/2.0/plug-ins/border-average |
| | /usr/lib/gimp/2.0/plug-ins/bump-map |
| | /usr/lib/gimp/2.0/plug-ins/cartoon |
| | /usr/lib/gimp/2.0/plug-ins/channel-mixer |
| | /usr/lib/gimp/2.0/plug-ins/checkerboard |
| | /usr/lib/gimp/2.0/plug-ins/cml-explorer |
| | /usr/lib/gimp/2.0/plug-ins/color-cube-analyze |
| | /usr/lib/gimp/2.0/plug-ins/color-enhance |
| | /usr/lib/gimp/2.0/plug-ins/color-exchange |
| | /usr/lib/gimp/2.0/plug-ins/color-rotate |
| | /usr/lib/gimp/2.0/plug-ins/color-to-alpha |
| | /usr/lib/gimp/2.0/plug-ins/colorify |
| | /usr/lib/gimp/2.0/plug-ins/colormap-remap |
| | /usr/lib/gimp/2.0/plug-ins/colorxhtml.py |
| | /usr/lib/gimp/2.0/plug-ins/compose |
| | /usr/lib/gimp/2.0/plug-ins/contrast-normalize |
| | /usr/lib/gimp/2.0/plug-ins/contrast-retinex |
| | /usr/lib/gimp/2.0/plug-ins/contrast-stretch |
| | /usr/lib/gimp/2.0/plug-ins/contrast-stretch-hsv |
| | /usr/lib/gimp/2.0/plug-ins/convolution-matrix |
| | /usr/lib/gimp/2.0/plug-ins/crop-auto |
| | /usr/lib/gimp/2.0/plug-ins/crop-zealous |
| | /usr/lib/gimp/2.0/plug-ins/cubism |
| | /usr/lib/gimp/2.0/plug-ins/curve-bend |
| | /usr/lib/gimp/2.0/plug-ins/decompose |
| | /usr/lib/gimp/2.0/plug-ins/deinterlace |
| | /usr/lib/gimp/2.0/plug-ins/depth-merge |
| | /usr/lib/gimp/2.0/plug-ins/despeckle |
| | /usr/lib/gimp/2.0/plug-ins/destripe |
| | /usr/lib/gimp/2.0/plug-ins/diffraction |
| | /usr/lib/gimp/2.0/plug-ins/displace |
| | /usr/lib/gimp/2.0/plug-ins/edge |
| | /usr/lib/gimp/2.0/plug-ins/edge-dog |
| | /usr/lib/gimp/2.0/plug-ins/edge-laplace |
| | /usr/lib/gimp/2.0/plug-ins/edge-neon |
| | /usr/lib/gimp/2.0/plug-ins/edge-sobel |
| | /usr/lib/gimp/2.0/plug-ins/emboss |
| | /usr/lib/gimp/2.0/plug-ins/engrave |
| | /usr/lib/gimp/2.0/plug-ins/file-aa |
| | /usr/lib/gimp/2.0/plug-ins/file-bmp |
| | /usr/lib/gimp/2.0/plug-ins/file-cel |
| | /usr/lib/gimp/2.0/plug-ins/file-compressor |
| | /usr/lib/gimp/2.0/plug-ins/file-csource |
| | /usr/lib/gimp/2.0/plug-ins/file-desktop-link |
| | /usr/lib/gimp/2.0/plug-ins/file-dicom |
| | /usr/lib/gimp/2.0/plug-ins/file-faxg3 |
| | /usr/lib/gimp/2.0/plug-ins/file-fits |
| | /usr/lib/gimp/2.0/plug-ins/file-fli |
| | /usr/lib/gimp/2.0/plug-ins/file-gbr |
| | /usr/lib/gimp/2.0/plug-ins/file-gif-load |
| | /usr/lib/gimp/2.0/plug-ins/file-gif-save |
| | /usr/lib/gimp/2.0/plug-ins/file-gih |
| | /usr/lib/gimp/2.0/plug-ins/file-glob |
| | /usr/lib/gimp/2.0/plug-ins/file-header |
| | /usr/lib/gimp/2.0/plug-ins/file-html-table |
| | /usr/lib/gimp/2.0/plug-ins/file-ico |
| | /usr/lib/gimp/2.0/plug-ins/file-jpeg |
| | /usr/lib/gimp/2.0/plug-ins/file-mng |
| | /usr/lib/gimp/2.0/plug-ins/file-openraster.py |
| | /usr/lib/gimp/2.0/plug-ins/file-pat |
| | /usr/lib/gimp/2.0/plug-ins/file-pcx |
| | /usr/lib/gimp/2.0/plug-ins/file-pdf-load |
| | /usr/lib/gimp/2.0/plug-ins/file-pdf-save |
| | /usr/lib/gimp/2.0/plug-ins/file-pix |
| | /usr/lib/gimp/2.0/plug-ins/file-png |
| | /usr/lib/gimp/2.0/plug-ins/file-pnm |
| | /usr/lib/gimp/2.0/plug-ins/file-ps |
| | /usr/lib/gimp/2.0/plug-ins/file-psd-load |
| | /usr/lib/gimp/2.0/plug-ins/file-psd-save |
| | /usr/lib/gimp/2.0/plug-ins/file-psp |
| | /usr/lib/gimp/2.0/plug-ins/file-raw |
| | /usr/lib/gimp/2.0/plug-ins/file-sgi |
| | /usr/lib/gimp/2.0/plug-ins/file-sunras |
| | /usr/lib/gimp/2.0/plug-ins/file-svg |
| | /usr/lib/gimp/2.0/plug-ins/file-tga |
| | /usr/lib/gimp/2.0/plug-ins/file-tiff-load |
| | /usr/lib/gimp/2.0/plug-ins/file-tiff-save |
| | /usr/lib/gimp/2.0/plug-ins/file-uri |
| | /usr/lib/gimp/2.0/plug-ins/file-wmf |
| | /usr/lib/gimp/2.0/plug-ins/file-xbm |
| | /usr/lib/gimp/2.0/plug-ins/file-xjt |
| | /usr/lib/gimp/2.0/plug-ins/file-xmc |
| | /usr/lib/gimp/2.0/plug-ins/file-xpm |
| | /usr/lib/gimp/2.0/plug-ins/file-xwd |
| | /usr/lib/gimp/2.0/plug-ins/film |
| | /usr/lib/gimp/2.0/plug-ins/filter-pack |
| | /usr/lib/gimp/2.0/plug-ins/flame |
| | /usr/lib/gimp/2.0/plug-ins/foggify.py |
| | /usr/lib/gimp/2.0/plug-ins/fractal-explorer |
| | /usr/lib/gimp/2.0/plug-ins/fractal-trace |
| | /usr/lib/gimp/2.0/plug-ins/gfig |
| | /usr/lib/gimp/2.0/plug-ins/gimpressionist |
| | /usr/lib/gimp/2.0/plug-ins/gradient-flare |
| | /usr/lib/gimp/2.0/plug-ins/gradient-map |
| | /usr/lib/gimp/2.0/plug-ins/gradients-save-as-css.py |
| | /usr/lib/gimp/2.0/plug-ins/grid |
| | /usr/lib/gimp/2.0/plug-ins/guillotine |
| | /usr/lib/gimp/2.0/plug-ins/help |
| | /usr/lib/gimp/2.0/plug-ins/hot |
| | /usr/lib/gimp/2.0/plug-ins/ifs-compose |
| | /usr/lib/gimp/2.0/plug-ins/illusion |
| | /usr/lib/gimp/2.0/plug-ins/imagemap |
| | /usr/lib/gimp/2.0/plug-ins/iwarp |
| | /usr/lib/gimp/2.0/plug-ins/jigsaw |
| | /usr/lib/gimp/2.0/plug-ins/lcms |
| | /usr/lib/gimp/2.0/plug-ins/lens-apply |
| | /usr/lib/gimp/2.0/plug-ins/lens-distortion |
| | /usr/lib/gimp/2.0/plug-ins/lens-flare |
| | /usr/lib/gimp/2.0/plug-ins/lighting |
| | /usr/lib/gimp/2.0/plug-ins/mail |
| | /usr/lib/gimp/2.0/plug-ins/map-object |
| | /usr/lib/gimp/2.0/plug-ins/max-rgb |
| | /usr/lib/gimp/2.0/plug-ins/maze |
| | /usr/lib/gimp/2.0/plug-ins/metadata |
| | /usr/lib/gimp/2.0/plug-ins/mosaic |
| | /usr/lib/gimp/2.0/plug-ins/newsprint |
| | /usr/lib/gimp/2.0/plug-ins/nl-filter |
| | /usr/lib/gimp/2.0/plug-ins/noise-hsv |
| | /usr/lib/gimp/2.0/plug-ins/noise-randomize |
| | /usr/lib/gimp/2.0/plug-ins/noise-rgb |
| | /usr/lib/gimp/2.0/plug-ins/noise-solid |
| | /usr/lib/gimp/2.0/plug-ins/noise-spread |
| | /usr/lib/gimp/2.0/plug-ins/nova |
| | /usr/lib/gimp/2.0/plug-ins/oilify |
| | /usr/lib/gimp/2.0/plug-ins/pagecurl |
| | /usr/lib/gimp/2.0/plug-ins/palette-offset.py |
| | /usr/lib/gimp/2.0/plug-ins/palette-sort.py |
| | /usr/lib/gimp/2.0/plug-ins/palette-to-gradient.py |
| | /usr/lib/gimp/2.0/plug-ins/photocopy |
| | /usr/lib/gimp/2.0/plug-ins/pixelize |
| | /usr/lib/gimp/2.0/plug-ins/plasma |
| | /usr/lib/gimp/2.0/plug-ins/plugin-browser |
| | /usr/lib/gimp/2.0/plug-ins/polar-coords |
| | /usr/lib/gimp/2.0/plug-ins/print |
| | /usr/lib/gimp/2.0/plug-ins/procedure-browser |
| | /usr/lib/gimp/2.0/plug-ins/py-slice.py |
| | /usr/lib/gimp/2.0/plug-ins/pyconsole.py |
| | /usr/lib/gimp/2.0/plug-ins/python-console.py |
| | /usr/lib/gimp/2.0/plug-ins/python-eval.py |
| | /usr/lib/gimp/2.0/plug-ins/qbist |
| | /usr/lib/gimp/2.0/plug-ins/red-eye-removal |
| | /usr/lib/gimp/2.0/plug-ins/ripple |
| | /usr/lib/gimp/2.0/plug-ins/rotate |
| | /usr/lib/gimp/2.0/plug-ins/sample-colorize |
| | /usr/lib/gimp/2.0/plug-ins/screenshot |
| | /usr/lib/gimp/2.0/plug-ins/script-fu |
| | /usr/lib/gimp/2.0/plug-ins/selection-to-path |
| | /usr/lib/gimp/2.0/plug-ins/semi-flatten |
| | /usr/lib/gimp/2.0/plug-ins/sharpen |
| | /usr/lib/gimp/2.0/plug-ins/shift |
| | /usr/lib/gimp/2.0/plug-ins/sinus |
| | /usr/lib/gimp/2.0/plug-ins/smooth-palette |
| | /usr/lib/gimp/2.0/plug-ins/softglow |
| | /usr/lib/gimp/2.0/plug-ins/sparkle |
| | /usr/lib/gimp/2.0/plug-ins/sphere-designer |
| | /usr/lib/gimp/2.0/plug-ins/text-brush.py |
| | /usr/lib/gimp/2.0/plug-ins/threshold-alpha |
| | /usr/lib/gimp/2.0/plug-ins/tile |
| | /usr/lib/gimp/2.0/plug-ins/tile-glass |
| | /usr/lib/gimp/2.0/plug-ins/tile-paper |
| | /usr/lib/gimp/2.0/plug-ins/tile-seamless |
| | /usr/lib/gimp/2.0/plug-ins/tile-small |
| | /usr/lib/gimp/2.0/plug-ins/unit-editor |
| | /usr/lib/gimp/2.0/plug-ins/unsharp-mask |
| | /usr/lib/gimp/2.0/plug-ins/value-invert |
| | /usr/lib/gimp/2.0/plug-ins/value-propagate |
| | /usr/lib/gimp/2.0/plug-ins/van-gogh-lic |
| | /usr/lib/gimp/2.0/plug-ins/video |
| | /usr/lib/gimp/2.0/plug-ins/warp |
| | /usr/lib/gimp/2.0/plug-ins/waves |
| | /usr/lib/gimp/2.0/plug-ins/web-browser |
| | /usr/lib/gimp/2.0/plug-ins/whirl-pinch |
| | /usr/lib/gimp/2.0/plug-ins/wind |
| | /usr/lib/gimp/2.0/python |
| | /usr/lib/gimp/2.0/python/_gimpenums.so |
| | /usr/lib/gimp/2.0/python/_gimpui.so |
| | /usr/lib/gimp/2.0/python/gimp.so |
| | /usr/lib/gimp/2.0/python/gimpcolor.so |
| | /usr/lib/gimp/2.0/python/gimpenums.py |
| | /usr/lib/gimp/2.0/python/gimpfu.py |
| | /usr/lib/gimp/2.0/python/gimpplugin.py |
| | /usr/lib/gimp/2.0/python/gimpshelf.py |
| | /usr/lib/gimp/2.0/python/gimpthumb.so |
| | /usr/lib/gimp/2.0/python/gimpui.py |
| | /usr/lib/gimp/2.0/python/pygimp-logo.png |
| | /usr/share |
| | /usr/share/appdata |
| | /usr/share/appdata/gimp.appdata.xml |
| | /usr/share/applications |
| | /usr/share/applications/gimp.desktop |
| | /usr/share/doc |
| | /usr/share/doc/gimp |
| | /usr/share/doc/gimp/AUTHORS.gz |
| | /usr/share/doc/gimp/NEWS.gz |
| | /usr/share/doc/gimp/README |
| | /usr/share/doc/gimp/README.Debian |
| | /usr/share/doc/gimp/README.MIDI |
| | /usr/share/doc/gimp/Wilber.xcf.gz |
| | /usr/share/doc/gimp/Wilber.xcf.gz.README |
| | /usr/share/doc/gimp/Wilber_Construction_Kit.xcf.gz |
| | /usr/share/doc/gimp/changelog.Debian.gz |
| | /usr/share/doc/gimp/changelog.gz |
| | /usr/share/doc/gimp/copyright |
| | /usr/share/man |
| | /usr/share/man/man1 |
| | /usr/share/man/man1/gimp-2.8.1.gz |
| | /usr/share/menu |
| | /usr/share/menu/gimp |
| | /usr/share/pixmaps |
| | /usr/share/pixmaps/gimp.xpm |
| | /usr/share/python |
| | /usr/share/python/runtime.d |
| | /usr/share/python/runtime.d/gimp.rtupdate |
| | /usr/bin/gimp |
| | /usr/bin/gimp-console |
| | /usr/share/man/man1/gimp-console-2.8.1.gz |
| | /usr/share/man/man1/gimp-console.1.gz |
| | /usr/share/man/man1/gimp.1.gz |
| | </code> |
| | |
| | ==== Paket: Speicherort ==== |
| | |
| | Da bei einer Installation auf einem **USB-Stick** mittels **ISO-Image** von [[https://www.kali.org/|Kali Linux]] in der Variante [[https://docs.kali.org/downloading/kali-linux-live-usb-persistence|Kali Linux Live USB (Encrypted) Persistence]] **__keine zusätzlichen Dateien in das ISO-Image geschrieben werden können__**, werden die Dateien aus den installierten Paketen auf der **verschlüsselten Partition** - hier z.B. **''/dev/sdb3''** gespeichert. |
| | |
| | Der **Mountpoint** unter dem die Partition des **USB-Stick** eingebunden ist lautet - hier z.B. |
| | * ''/lib/live/mount/persistence/sdb3/'' |
| | und hat ein Verzeichnis mit dem Namen **''rw''**, so dass sich alle **"persistence" (dauerhaft) gespeicherten Dateien** in nachfolgendem Verzeichnis befinden: |
| | * **''/lib/live/mount/persistence/sdb3/rw/''** |
| | |
| | Nachfolgend ein Beispiel, aus der Installation des des Pakets ''gimp'': |
| | <code bash> |
| | # ll /lib/live/mount/persistence/sdb3/rw/usr/bin/ |
| | total 9976 |
| | lrwxrwxrwx 1 root root 8 Dez 26 22:11 gimp -> gimp-2.8 |
| | -rwxr-xr-x 1 root root 6975676 Dez 26 22:11 gimp-2.8 |
| | lrwxrwxrwx 1 root root 16 Dez 26 22:11 gimp-console -> gimp-console-2.8 |
| | -rwxr-xr-x 1 root root 3234620 Dez 26 22:11 gimp-console-2.8 |
| | </code> |
| | |
| | ==== Paketliste ==== |
| | |
| | Nachfolgende Pakete sind in meinem Beispiel **aktuell zusätzlich Installiert**: |
| | * ''gimp'' |
| |
| ===== Problemlösungen ===== | ===== Problemlösungen ===== |
| |
| ==== The following signatures where invalid ==== | ==== Problem: The following signatures where invalid ==== |
| |
| Falls beim Versuch, **"upzudaten"** z.B. nachfolgende Fehlermeldung auftreten sollte: | Falls beim Versuch, |
| | * ein **Update** durchzuführen |
| | * ein **Paket zu installieren** |
| | nachfolgende Fehlermeldung auftreten sollte: |
| <code> | <code> |
| # apt-get update | # apt-get update |
| W: Some index files failed to download. They have been ignored, or old ones used instead. | W: Some index files failed to download. They have been ignored, or old ones used instead. |
| </code> | </code> |
| ist dies dem geschuldet, dass wenn [[https://www.kali.org/|Kali Linux]] nicht regelmäßig aktualisiert wird, dann ist das **"Archiv-Keyring-Paket"** veraltet und dies führt zu oben genannter Fehlermeldung. | ist dies dem Umstand geschuldet, dass wenn [[https://www.kali.org/|Kali Linux]] nicht regelmäßig aktualisiert wird, das **"Archiv-Keyring-Paket"** veraltet ist, was zu zu oben genannter Fehlermeldung führen kann. |
| |
| Mit nachfolgendem Befehl, kann ein neuen Schlüssel manuell aktualisiert werden: | Mit nachfolgendem Befehl, kann ein neuen Schlüssel manuell aktualisiert werden: |
| </code> | </code> |
| |
| Anschließend sollten **"updates"** wieder möglich sein. | Anschließend sollten Updates und Paket-Installationen wieder möglich sein. |
| |
| |
